From your sage.properties, the server is on 9250, you have an extender on 9260 and the SageTCPServer logging is turned off... Then the sageclient.properties is also trying to use 9250 for the server's UI and there should not be an entry for an extender at 9260 (of course that was just a copy & paste, but)...

So of course with MLSageTV trying to connect to 9252, there is nothing to connect to...

Ok

iam not getting any errors in my log on mlserver plugin for sage tv, and when i navigate thru the menus on my ml client machine the log is updating. but it is not show any info on my ml client.
i have loaded sage tv client on my client machine and that works.

i have some screen shots below

Attached images from ml server

For the settings, the version of SageTCPServer is shown as 0.0, which means it's not actually connected...

For the client, have you shutdown SageTV and its service, then edited the sageclient.properties to read:

sageTCPServer/clients=local.9252

Then restarted the SageTV service mode and it's UI? Otherwise, there is no client to control...

Once it's done, and you've restarted MLServer, please zip up and attach your updated MLServer\Logs\MLSageTV.log, SageTV\SageTV\sage.properties, SageTV\SageTV\sageclient.properties, SageTV\SageTV\sagetv_0.txt and SageTV\SageTV\sagetvclient_0.txt.

Ok


Still not working


i have attached files as requested could not locate SageTV\SageTV\sagetv_0.txt and SageTV\SageTV\sagetvclient_0.txt.
They dont exist in the directory.

Ok, first thing, you have the port 9252 defined twice... So stop SageTV and its service, then edit sageclient.properties to read:

sageTCPServer/clients=local.9251

Second, you have MLSageTV trying to connect twice to 9252


and no attempt to connect to the Server at 9250, so yeah, you're not getting any data... You did connect to 9252, but with the double definition, not sure what kind of result that got you...

Ok the serve is now comming up with a version no

and my cinemar client is controlling the sage tv client i can see recordings but i cant see the guide?????

should the video feed come up on my cinemar client??? or does the plugin just control the sage tv client?

the cinemar client is working only on the server when i try to set it up the cinemar client and sage tv client on a remote pc i cant get it to work??

Good!


Well, there is no built-in guide as such, it relies on TVLobby for that... I just don't have the Flash expertise to reproduce that part myself.


No, that is what the SageTV client/extender are for. Typically the MainLobby clients are displayed on a small touchscreen, so you wouldn't want to watch your TV show there.


If you can't get the MainLobby client to contact the MainLobby server, that would be a question for the Cinemar forums... Maybe your firewall is blocking access to the required ports? Have you installed the MLSageTV UI on that remote PC?

Ok i have the program guide working with tv lobby.


is it possible to change channels from the tv guide and progrm recording of programmes?


is this done in tv lobby commands?

if so can you oint me in the right directions


Thanks

Good.


Sure, if you look at the bottom-right corner, there is a Watch button, and over it are the recording job options: M = Manual (i.e. only one time), 1 = First run (i.e. new episodes only) or A = All (First run + reruns) buttons.

In TVLobby, the Watch button can be configured to send a command, but it might be easier to just press M, go back to the main page and hit "Watch Live TV".